• Dubond Products (India) Private Limited

Hydrolastic Waterproofing System

Hydrolastic Waterproofing System have two aspects are component A is grey-blue powder and component B is white liquid. The surfaces must be waterproofed and/or protected with two pack cementitious skimming plaster with HD technology of the hydrolastik type by dubond applied by roller or brush in two coats each 1mm thick. The product must guarantee crack bridging ability at low temperatures (-20°C) and the immersion in clorinated water performance established by European standard EN 14891. These waterproofing systems are must be used if the product must be applied on top of bituminous sheathing, something that can only be done on small areas. Proceed by briefly stirring until the product becomes perfectly homogeneous, then apply a coat with a brush, roller or airless method, 12 h prior to applying hydrolastik and 250-350 g/m2 of primer is required.They also offer hydroshields, hydrobuild, hydrobuild-osmocam, hydrogrum, hydroepoxy, hydrolastic net, and hydrolastic strip.

Storages

• 12 months in a dry place, protected against freezing
• Component A: 12 months in the unopened pack in a dry place
• Component B: 12 months in the unopened pack, protected against freezing