• Kluber Lubrication India Private Limited

Bonded Coatings

Kluber Lubrication offers a wide spectrum of bonded coatings. The range includes: OKS 500-MoS2 bonded coating, heat-curing ? used as dry lubrication with solid lubricants, as longer effective deposit layer for slow speed and high pressure operations, e.g., on ways, joints, ball and socket joints and similar components where occasional movements occur; OKS 510-MoS2 bonded coating, fast-curing ? used as dry lubricant coating for sliding surfaces operating in dirty/dusty atmospheres; these can also be used for joints and sliding surfaces of earth moving equipment, for the running-in gears, etc; OKS 511-MoS2 bonded coating spray ? used as a dry lubricant coating for sliding surfaces operating in dirty/dusty atmospheres; the lubrication of coarse chains and guide ways operating under high loads and exposed to high temperatures can be effectively done; OKS 530-MoS2 water-based bonded coating, air-curing ? used for dry lubrication with solid lubricant as longer effective deposit layer for slow speed and high pressure; OKS 536-aqueous-graphite bonded coating, air-curing ? used as dry lubrication where up to now MoS2 or graphite pastes (staining, oily or harmful to health) or powders (dust) have been used. They can also be used for chain lubrication; and OKS 589-MoS2 bonded coating, heat-curing ? used in those applications where there is a low sliding speed and high surface pressure, for example in levers, slide ways, linear guide systems, spindles etc.