Temperature and Humidity Sensor/Transmitter

Temperature and Humidity Sensor/Transmitter


Libratherm offers T + RH sensor with Transmitter model HYGROTX-3000 and HYGROTX-290 for measuring and transmitting the analogue values proportional to both T and RH Input. The signal generated by Hygroclip is of the order of 1 volt DC and cannot be transmitted over very long distance and if done so the signal is likely to drop over very long cable which will result in the inaccurate measurement of temperature and %RH. The transmitter featured here converts the low level signal to equivalent 4-20mA, which can be transmitted over a long distance without loss of accuracy in the measurement. Dual output of 4-20mA proportional to T and %RH can be used for remote measurement and indication. To suit industrial requirement more advanced transmitters model HTX-3000 are also available with local display. To facilitate interface with PLC or DCS or with any other process controller – digital serial communication on RS485 bus with MODBUS RTU protocol in slave mode is also provided.

HYGROTX-3000:

  • T+RH Transmitter without display(suitable for max.Temp.60oC)
  • Sensor Make: Hygroclip CP – Rotronic Swiss make
  • %RH Range: 0 to 100%
  • %Rh Accuracy: +/- 1.5%
  • Supply Voltage: 12-36VDC@50mA
HYGROTX-290:
  • T+RH Transmitter without display(suitable for max.Temp.150oC)
  • Sensor Make: H290 – Rotronic Swiss make
  • %RH Range: 0 to 100%
  • %Rh Accuracy: +/- 1%
  • Supply Voltage: 12-36VDC@50mA

  • Input from HYGROCLIP CP sensor
  • 4-20mA proportional to T and RH
  • IP 65 ABS plastic enclosure
  • Operates on 18 to 36VDC

Products from Libratherm Instruments Private Limited

Verified

T+RH INSTRUMENTS

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote
Verified

Multi Loop PID Controller

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote

Products from MACHINE TOOLS, POWER & HAND TOOLS Category

Verified

Perforated Metal Facades

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote
Verified

Rotary Broaching Tool

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote
Verified

Polygon Turning Machine

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote

Hi There!

Now get regular updates from IPF Magazine on WhatsApp!

Click on link below, message us with a simple hi, and SAVE our number

You will have subscribed to our Industrial News on Whatsapp! Enjoy

+91 84228 74016