• PG Electronics

Ring Sensors for Line Production Monitoring

PG Electronics manufactures Ring Sensors for Line Production Monitoring. For monitoring uninterrupted production of ferrous rod, wire or strips, ring sensor is the right tool. The sensor is RS –101 manufactured by PG Electronics detects the breakage continuity in line production. The Sensors are large enough to accept pass through of line produced material like bar, wire or strip. Presence or absence of material will give a solid state output with LED indicating the change.

The ring sensor RS-101 is suitable for operation on 10–30 V.DC with logic NO or NC output enough to drive a relay coil. Designs with suitable bores of 45mm, 25mm and 13mm. are available to suit various bar or wire diameters of ferrous and even nonferrous materials. A sensitivity adjustment provision enables one to adjust the operating range depending upon the size and nature of the material, which threads through the ’pass’ opening provided in the sensor.

The ring sensor RS-101 is a robust unit and has a built-in mounting facility. It finds it’s application in bar or wire cold rolling mill and all industries where this type of material is used as in feed or production line. RS102-100 is especially designed for CNC or similar systems where presence of the bar and even counting of the products can be registered. The sensor is also used for confirming or counting of bolts, nuts or blanks in production. Further to detect unwanted metal chips in moulding or gross in-feed material the ring sensor may be effectively utilized.