• R S Electronics

Energy Saving PIR Motion Sensor

LC-200 series is a passive infrared Sensor Switch with two dual element sensor built-in to provide 200° ultra wide angle detection. It can automatically switch on the indoor or outdoor lighting by sensing the presence of human body. Its unique mechanism design provides possibility of wall or ceiling mount. Both LUX and TIME controls can be adjusted according to individual requirement. The LC-200 is for general light control with less than 10 Amp load switching. The LC-200 HD is for heavier lead up to 16 Amp load switching. The LC-200 LV is a special model with low voltage power supply to switch the load up to 10 Amp. The main features include Wall/ceiling mount design , Built-in photocell sensor , Adjustable TIME & LUX control, Works at 100 ~ 250 VAC and 10 to 16 V DC, IP45 Weatherproof protection, Double dual element sensor, Sensor head tilt mechanism, RFI/EMI immunity etc .. etc. Can be adjusted the delay time of 8 sec.~8 min, using Photocell sensor ( C d S ). The Infrared sensor Dual element x 2 will detect and sense with speed of 0.15~3 m/sec. The PIR motion sensor should be mounted with minimum height of 1.8~3.0 m (6~10 ft) with Operating temperature -20C~50C (-4F~122F). The size of unit will be 125 x 105 x 62 mm approximately.