• Micon Automation Systems Private Limited

Industrial/Temperature Controllers

Micon Automation Systems offers Industrial/Temperature Controllers, AI-518/518P/519 Series. These support various thermocouples, RTDs, linear voltages/currents/resistances and radiation (infrared) thermometer, and providing extensible input socket for special input specifications, 0.3 or 0.2 (V 7.5 version) measurement precision, modularisation output supports SSR voltage, linear current/voltage, relay contact switch, TRIAC non-contact switch, multiple control algorithms as standard PID, AI PID or MPT with auto-tuning, self-learning are selectable and perform excellent control with no over-shooting or under-shooting. On/Off control is also available, advanced AIBUS protocol, supporting RS485 and RS232C communication protocol, provides an excellent way for data acquisition of small or large controller network via PC or any computer control system, support multiple alarm functions of upper limit, lower limit, upper deviation and lower deviation and customize 4 alarming output ports supporting multiple alarming signal output from same position. Provide alarm blocking at the power start-up to avoid false-alarm, process value (PV) or set point (SV) can be retransmitted into standard current signal with 14-bit high resolution, 0.2%FS output precision and better than 100 ppm/°C temperature drift, intuitive programming logic and simple to operate. Any parameter can be promoted for operator access or password protected. Users can set their own passwords for further security. AI-519 is equipped with the functions of manual/automatic bumpless switch and manual/automatic tuning functions. AI-518 has 30-segment program control and the program can be at any time. It provides programmable and operable commands such as jump (loop), run, pause, stop, PV start-up function and five power-cut/starting event handling modes.