• Pro-Med Instruments (P) Limited

Indicating Controller

Pro-Med Instruments offers DIN rail mounting type-indicating controller, DCL-33A series. If the DCL-33A is used as a converter, thermocouple input, RTD input and DC input signals are converted to isolated 4-20 mA DC output. It is also possible to change the scale freely; possible to expand control points – from one to max 31 spots of measurement control can be carried out through serial communication (RS-485). It is very easy to connect DCL-33A units by using the exclusive communication cable (CDD) between them; conforms to Modbus protocol – Shinko protocol and Modbus protocol are provided as a serial communication (C5) protocol (for Modbus protocol, RTU mode and ASCII mode are available). Therefore, the DCL-33A can be connected to Modbus compatible instruments without using a communication converter; can be used as a set value digital receiver – by using Shinko programmable controller (with SVTC option) as a program setter in combination with DCL-33A (with C5 option), the DCL-33A can also be used as a programmable controller for multiple positions (a maximum of 31 units of DCL-33A can be connected); easy mounting and removal – hook the upper part of the DCL-33A to the DIN rail and fit the lower part of it to the DIN rail. Fixed DCL-33 A is resistant to vibration, and easy to maintain. To remove the DCL-33A from the DIN rail, release the hook at the lower part of the DCL-33A by sliding it downward with a flat bladed screwdriver; and safety standard – UL/C-UL and CE marking.