• Dynatek

Fire Engine Control Panel

Dynatek make fire engine control panel is the most compact, user-friendly, highly reliable fire engine control system. This is provided with micro-controller based diesel engine controller "ECR16" with audio/visual alarm and battery charger with ammeter/voltmeter. ECR 16 controller is developed to start engine in auto/manual mode. In auto mode the controller continuously scans "hydrant pressure", and if it drops the controller cranks the engine automatically through a start relay. When engine reaches to set running condition it is automatically switched over to manual mode to stop the engine manually as per the "fire fighting norms". It accepts input faults (potential free contact) like LLOP, over speed, over heat, etc. If any one of the input fault occurs, the corresponding LED window starts flashing and gives signal to hooter relay for audio alarm. A hooter is provided in the control panel for audio alarm. Input faults are site selectable ("NO" and "NC"). Dual rate flashing is provided for differentiating the first and subsequent fault. The setting for "On Time", "Off Time" and Attempt for Crank can be done by "Dip switch" provided on the backside of controller. Maximum four attempts can be selected. SMPS battery charger is provided to charge main and standby battery in trickle and boost mode automatically. Battery charger is automatically disconnected when engine is in running condition. Optional facility: 1) Remote hooter connection (6 A max); 2) Open collector output for repaeter panel; and 3) RS232/RS485 port facility.