• Adco Controls

Elevator Control System

Adco Controls is engaged in manufacturing high tech, cost effective yet robust micro-controller based Elevator Controls Systems since 1995. Model AD013_Slim comes with the following features: number of stops – 8 stop auto door down collective, 6 stop fully collective selective auto door; in case of extension card usage – 16 stop auto door down collective, 11 stop fully collective selective auto door; special design for the MRL control system; operations – universal, simplex down, simplex full; speed – up to 2 mtr/sec; LCD and keypad interface – using LCD and keypad user can set parameters as per their requirement; also they can monitor the status of lift on LCD as well as they can see the fault record using keypad; all are password protected so only authorised person can change the parameters; manual will be consisting of parameters list and instructions of programming; call register LED and call push button are on single wire; on board seven segment display; serial COP card attachment using RS485; all the inputs and outputs are opto-isolated and available in both 12 V DC and 24 V DC; all the inputs and outputs are carrying LED indication on board; suitable for the MRL panel where it is occupying very less space; and this control system also includes ARD (Auto Rescue Device).