Schedule a Call Back
Access Control System
Access Control System
Snehapadma Software Technologies Pvt. Ltd. offers Access Control System, VertX® V1000 Network Controller. Access Control Processing and Host Interface for up to 32Door/Reader Interface, Input Monitor, or Output Control Units.
The HID VertX products provide a complete and fully featured hardware/firmware infrastructure for OEM access control software host systems, communicating via industry standard TCP/IP protocol, over 10/100 Mbps Ethernet or the Internet. The V1000 boasts a 32-bit RISC processor running the Linux Operating System. On-board flash memory allows program updates to be downloaded via the network. The V1000 connects up to 32 Door/Reader, Input Monitor, or Output Control Interfaces via two independent RS-485 networks, each network having two sets of input connections for optimum system topology. This architecture minimizes the impact on corporate LANs by using only one TCP/IP address for every 32 interfaces, and by handling low-level transactions on the RS-485 network.
Product & Technology News
- Stores a complete access control and configuration database for up to 32 Reader Interfaces (up to 64 doors) and 44,000 cardholders with expansion capability up to 250,000 cardholders.
- The access control system interfaces with combinations of devices with a maximum of:
- 32 Door/Reader interfaces (up to 64 doors/readers) or
- 32 input monitor interfaces (up to 512 monitor points) or
- 32 output control interfaces (up to 384 control relays)
- Reports supervised inputs/alarms with 255 priorities.
- Allows local connection of a laptop computer for diagnostics and configuration.
- Connects to the host and other devices on a TCP/IP network.
- Receives and processes real time commands from the host software application.
- Reports all activity to the host.
- Controls and communicates with all connected devices.
- Buffers offline transactions and uploads to the host when communication is restored.
- Allows fallback communications via dialup or RF modem if TCP/IP network communication is lost.
- UL 294 and UL 1076 recognized component.
Products from Snehapadma Software Technologies Private Limited
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines