• Weldor Engineering Private Limited

Hydraulic Shearing Machine, Fixed Rake Angle

Weldor Engineering Pvt Ltd offers a Hydraulic Shearing Fixed Rake Angle Machine. This light duty hydraulic guillotine shearing machine with fixed rake angle is designed to suit sheet metal industries using thin sheets. The rigid steel frame is optimally designed to avoid weak sections at load support and is of interlocked design. The table of frame is welded with support of steel plates. The table top surface is machined with provision of T-slot to facilitate front gauge stopper. The ram assembly is welded with steel plate support. The upper beam is guided by three point roller guides. A replaceable hardened liner is provided for minimum wear. It eliminates lubrication of guides. The hydraulic system is mounted at top at rear side of machine, with components from internationally reputed make like Vickers, Dowty, Rexroth, etc. Valves are mounted on a compact manifold block minimising piping and chances of leakages. For oil cooling sufficient size of oil reservoir is provided. Cylinders are precisely honed and are fitted with hard chromed piston rod with best quality sealing elements. Cylinders are connected with upper beam (cutting beam). Hydraulic hold down pads hold the sheet securely to avoid slipping and bowing resulting in clean square cut. Hold down units are provided for better clamping while cutting narrow strips, and adjusted with help of stroke setting rod and limit switches. Blade clearance can be adjusted manually by lever on each side of machine with calibration of clearance suitable for thickness. Hand operated back gauges are provided. Weldor shears are provided with high quality, single segment (HcHcr) blades for longer tool life. Ease in assembling of blade reduces down time. The blades are four edged. The machine can be operated by push button or by foot switch. When foot switch is pressed hold down plungers come down & upper beam starts shearing operation. If foot switch released at any point of shearing, the upper beam will return back from that point. The finger guard is fitted in front of hold down for operator's protection without obstructing viewing. The company also offers Bending Machine for Hydraulic Sections, Turret Punch Press, Preowned, Plate Bending Machines, Hydraulic Presses for SMC Component, CNC Hydraulic Turret Punch Press, etc.