• Shilpa International (Impex) Private Limited

Sensor Signal-Conditioning Unit

Shilpa International offers Sensor Signal-Conditioning Unit. This unit is housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a DC output signal voltage in the range 0-5 V DC. The SSC also provides a 5 V DC source that may be used as a supply for many types of sensor, including potentiometers, contact-less position transducers, tilt sensors, pressure transducers and load cells. Choice of outputs: The SSC converts the sensor output voltage signal to a 4 - 20 mA (or optional 5-19 mA) current output, or by using additional module cards, into a variety of different voltage formats or a digital PWM output. Model SSC normally operates from an unregulated 10-30 V DC supply. Where lowest noise performance is required with the optional voltage module card, a negative supply in the range -10 to -30 V DC may also be employed. The SSC housing is designed for mounting on a bulkhead close to the sensor, by using M5 screws through the mounting holes that are located under the housing lid. The supply, output and sensor connections are routed through two IP 68 rated cable glands that can accommodate cable diameters of between 3 and 8 mm. Connections are made to a screw terminal block on the SSC board. The SSC module is housed in a rugged die-cast aluminium alloy housing, suitable for harsh environmental conditions and electrically noisy installations, with EMC immunity to 100V/m. The housing features an impressive environmental performance, with dust and fluid protection to IP68 and submersion to 2m.