• Dover Flexo Electronics, Inc

iAmp2 Inline Amplifier

The iAmp2 is a compact amplifier / interface module that connects directly (via standard industrial connectors) to DFE tension transducers, or "inline" on transducer connector cables. iAmp's function is to convert millivolt-level transducer output signals to a 0-to-10 Volt DC signal proportional to tension and a 0-to-1mA signal proportional to tension. Using an iAmp2 module is a simple alternative to mounting a larger, less flexible electronics device--usually a transducer-interface circuit card or complete indication package on a press or machine frame for tension monitoring. Because it is easily hidden, the iAmp is an ideal tension amplifier for OEMs and system integrators. The iAmp2 connects in one of three ways to the transducer(s) and to your PLC, drive or other control device. Connections from tension transducers to the iAmp can be made directly (via standard industrial connectors) or "inline" on transducer connector cables with industrial connectors. The third way to connect is via cable with flying leads going into terminal strips at the input and output of the iAmp2 (TT configuration). With the Quik-Cal™ feature front-panel push buttons are used instead of potentiometers for zero and calibration settings. This saves valuable setup time since no tension display is needed, no screwdriver is needed, and no second person is needed to assist. The Zero and Cal settings are stored digitally.

Tension Amplifier Capabilities

• 0 - 1 mA meter output proportional to tension
• 0 - 10 VDC tension signal output
• Quik-Cal™ pushbutton zero and calibration pot adjustments
• Field-retrofittable to all DFE transducers
• Small package ensures application flexibility
• Inline version can be stowed in cable tray or mounted to DIN rail
• DIN-rail mounting clip and "Hook and Loop" mounting (for cable-inline versions only)