Schedule a Call Back
TRMS Power Clampmeter With PC Interface
TRMS Power Clampmeter With PC Interface
Kusam Electrical Industries Ltd offers a single phase TRMS Power Clampmeter with PC Interface, with 15 functions and 23 ranges, Model KM 2740.
The Company also offers
Combustible Gas Detector, KM-5420A,
AC/DC Trms Digital Clampmeter,
Temperature Humidity Meter, etc.
- Sensing – true RMS sensing
- Jaw opening and conductor diameter – 45 mm max
- Display – voltage functions – 6000 counts LCD display(s)
- Power, Ohm and Hz functions – 9999 counts LCD display(s)
- ACA clamp-on function – 4000 counts LCD display(s)
- Update rate – power functions 1 per second nominal
- Voltage, ACA clamp-on, Ohm, Hz and temperature functions – 4 per second nominal
- Polarity – automatic
- Low battery indication – below approx 2.4 V
- Operating temperature – 0°C to 40°C
- Relative humidity – maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C
- Altitude – operating below 2000 m
- Storage temperature – -20°C to 60°C, < 80% RH (with battery removed)
- Temperature coefficient – nominal 0.15 x (specified accuracy)/°C @ (0°C-18°C or 28°C -40°C) or otherwise specified
- APO timing – idle for 17 minutes
- APO consumption – 10 µA typical
- Dimensions – 224 (L) x 78 (W) x 40 mm (H)
- Weight – 224 gm, approx
- Power measurement of selectable W, VAR and VA with dual-display total power factor features
- Auto VA (auto selection on ACV, DCV or ACA functions)
- Peak-rms hold
IPF TRMS Power Clampmeter With PC Interface
TRMS Power Clampmeter With PC Interface
TRMS Power Clampmeter
Power Clampmeter
Clampmeter
KM 2740
TRMS Clampmeter
Products from Kusam Meco Import Export Private Limited (Kusam Electrical Industries Limited)
Verified
Verified
Hook Type Highly Insulated Frp Telescopic Earth/discharge Rod
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
“Kusam-Keco” Partial Discharge Acoustic Imager - Model - Km-pdai
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Kusam-meco” 1000a Ac Digital Clampmeter With Inrush Current -Model
Deburring, Drilling, Boring, Tapping and Threading Machines
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
