Schedule a Call Back
Leakage Current Clamp Meter
Leakage Current Clamp Meter
Kusam Electrical Industries Ltd offers Leakage Current Clamp Meter with Data Logging Function & PC Interface, KM 2008.
- Sensing : Average sensing
- Jaw Opening Size : 40mm
- Function : Measurement of AC leakage current, AC Current upto 300A & On-line measurement
- Display Size : 32mm x 15mm
- Test Mode : Clip-on CT, Integral mode
- Display Mode : Four Digit LCD display.
- LCD Dimension : 35mm x 21.5mm
- Sampling Rate : About 2times/s
- Range : 0.00mA ~300.0A (50/60Hz)
- Resolution : 10µA
- Line voltage : Line test under AC600V
- Data Hold : Display shows “DH†symbol
- Out of Range : Display shows “OL†symbol
- Data Storage : 99 groups, all used when display “FULLâ€
- Power Consumption : about 5mW
- Peak Hold : Push “HOLD†without release, the meter will show the peak value during the pushing period
- Battery Voltage : Ҡindicating the battery voltage is lower then 7.2V. Then the battery have to be changed
- Operating Temperature and Humidity : 0°C ~ 40°C : below 80% R.H
- Storage Temperature and Humidity : -10°C ~ 60°C : below 70%rh
- Insulation Strength : AC 2kV/rms (between the alloy of the clamp & housing)
- Auto Power Off : 5 minutes after power on, it will power off automatically to lower the power consumption
- Power : Standard 9V battery
- Dimension : 175(W) x 70(H) x 38(T)mm
- Weight : Approx. 120g (with battery)
- Safety: IEC1010-1, IEC1010-2-032, pollution degree 2, CAT III (600V)
- Accessories:Carrying Case, Battery installed, User's Manual, RS232 PC Interface CD
IPF Leakage Current Clamp Meter
Leakage Current Clamp Meter
Leakage Current
Clamp Meter
Leakage
Current Clamp
Meter
Leakage
Current
Clamp
Meter
Products from Kusam Meco Import Export Private Limited (Kusam Electrical Industries Limited)
Verified
Verified
Kusam-meco” 6000 Counts Trms Digital Multimeter - Model - Km 2257
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Kusam-meco Three Phase Power Analyzer
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines
