• Aimil Limited

Inspection Instruments

---

Inspection equipments products measure coating thickness, climate, porosity & adhesion as well as a wide range of physical test parameters required for the formulation of coatings.

Elcometer 456 Coating Thickness Gauge

• The new Elcometer 456 Coating Thickness Gauge sets new standards making measuring dry film thickness faster, reliable and accurate; helping you to become more efficient
• The Elcometer 456 is available in four different models: E, B, S and T. Each gauge provides the user with increasing functionality - from the entry level Elcometer 456 E, to the top of the range Elcometer 456 T, with memory, alpha-numeric batching and Bluetooth® communication
• Integral coating thickness gauges are ideal for single handed operation as the wide footprint of the Bigfootâ„¢ internal probe provides greater stability during measurement - allowing for consistent, repeatable and accurate results
• Elcometer 456 Dry Film Thickness Gauge with Ultra Scan Probe - Measures Coating Thickness 40% Faster with 456 Ultra/Scan Probe. More Productive for SSPC PA2

Elcometer 130 Salt Contamination Meter
Elcometer 130 Salt Contamination Meter for Surface Preparation - Surface Contamination

• Fast reading rate allow multiple tests to be completed efficiently
• Measuring range up to 50µ g/cm2 (3000ppm)
• Storeup to 150,000 readings in 2,500 batches
• Soluble salt and conductivity meter in one gauge
• 2 year gauge warranty
• Dust and water resistant rugged design equivalent to IP64
• Measurement units & range µg/cm2, ppm, µS/cm, mS/cm, % Salinity, mg/m2

Elcometer 506 Pull Off Adhesion Tester
Elcometer 506 Pull off Adhesion Tester measure coating adhesion testing on flat, curved, thick and thin substrates including metal, wood, concrete and other fibrous materials.  

Elcometer 408 Gloss & DOI Meter
Elcometer 408 Gloss & DOI Meters provides the latest gloss measurement technology for accurate gloss, haze and DOI analysis in a single reading. Dual (20/60°) or Triple (20/60/85°) versions for max. accuracy and resolution in all gloss applications.    

Elcometer 1720 Washability & Abrasion Tester
Elcometer 1720 Washability & Abrasion Testers are Robust, Reliable and versatile machines for testing the washability, brushability and resistance of a wide range of materials inculding paint, lacquers, inks, coatings, leather, wood, plastics, printed materials, fabrics etc.    

Elcometer 4340 Motorised Film Applicators
The Elcometer 4340 Motorised Film Applicators an essential machine for preparing a wide variety of product samples including paint, varnish, cosmetics, glue, etc. with total consistency and reproducibility on various substrates including contrast charts, sheet steel, plastic foils and glass. All Elcometer 4340 models have 11 pre-set speeds and adjustable stroke length with quick release system.
 
Elcometer 280 DC pulsed Holiday Detector
Elcometer 280 DC pulsed Holiday Detector - A 'Stick Type' holiday detector designed to make pulsed DC high voltage holiday detection safer, easier & more reliable than ever before.  
 
Elcometer 319 Dew point Meter
The Elcometer 319 Dew point Meter has been designed to measure and record all the relevant climatic parameters required to determine whether conditions are suitable for painting.  
 
Elcometer 7061 Surface Roughness Tester

• In protective coating applications there is a requirement to measure surface roughness
• Measurements of Surface Roughness are expressed in terms of Ra, Rz or Tp. These values include peak-to-valley profile measurement in combination with an assessment of the frequency of peaks within the sample area
• The Elcometer 7061 is a light weight and portable measuring solution for the range of surface roughness measurements required for compliance to International Standards
• The unit is also suitable for assessing surface roughness conditions in a wide range of general industrial applications; particularly where the sample is too large to bring to the laboratory

 Elcometer Model CG60 Ultrasonic Thickness Gauge

• The Elcometer Model CG60 Ultrasonic Thickness Gauge - Ideal for the NDT inspection of pipes, storage tanks and other metal structures, the CG60 ultrasonic thickness gauge features both Pulse-Echo (PE) and Echo-Echo mode (EE) ThruPaintâ„¢ technology
• Offering all the features and benefits of the CG50 corrosion thickness gauge, the CG60 range of handheld ultrasonic gauges are designed to ignore the coating thickness giving a true material thickness value
• Designed to ignore applied coatings up to 2mm (80mils) thick on metal substrates, the CG60 is ideal for identifying internal corrosion of a coated sample
• The CG60 corrosion thickness gauge also offers high speed scanning, taking 16 readings per second, making quick scanned passes over the test material. With the lowest thickness value held in memory and displayed when the scanning is complete
• Once a user defined nominal thickness value is set the differential mode will display the +/- thickness difference from the nominal value entered
• The built-in minimal thickness alarm mode illuminates a red LED and an audible alarm sounds when a measurement falls below the user defined target value

Advantages

• Range of display & measurement options: Pulse-Echo, Echo-Echo ThruPaintâ„¢ technology
• Adjustable gain: -30dB to 70dB range
• Multiple calibration and material selection options
• High speed scan mode: 16 readings per second
• Differential and minimal thickness alarm modes

 
 Elcometer 2300 Digital Rotational Viscometer
Elcometer 2300 Digital Rotational Viscometer is used to measure the viscosity of liquids in accordance with ISO 2555 and several ASTM standards either manually or PC controlled.