• Tribotech India

Flange Measurement System

Tribotech offers Easy-Laser Flange Measurement System, a new way of working on measurement of flanges. The E-Series geometrical system includes laser transmitter D23 Spin with power rotating head. This is how it works in brief: the laser beam from the transmitter rotates constantly and creates a reference plane over the entire measurement object. Measurements are performed quicker as one does not have to align the beam for each new measurement position. Just place the detector at the desired measurement points and register the reading by a push of a button. In principle, people can perform the measurement themselves. It is then possible to generate a PDF report containing graphs and measurement data directly from the measurement system’s display unit. All information about the measurement object is documented. Easy-Laser flange system can be used on all sizes of flanges, regardless of diameter. One can measure 1 to 5 circles of measurement points, for example inner, middle and outer circles, in order to see the taper of the flange. Observe the result as a true 3D image in the display unit directly after measuring. Then evaluate the result easily with different calculation settings, for example three point reference, best fit or all positive. This can also be done directly on site without having to stop to go to a PC with separate analysis programs, which was the case previously. This makes production much more efficient.