• Tajima Asa Bhanu Tools Limited

Angle Meter

Slant 100 is an angle meter fromTajima Asa Bhanu Tools Ltd, made in collaboration with Tajima Tool Corporation, Japan, to cater to the needs of engineering, fabrication and construction industries. The instrument case is made of ABS resin. A super-large bubble vial with permanent dual index ring inside the groove gives accurate level indication over a wide range of temperature variations. This instrument is used for quick measuring/setting of an angle/slant required. For the measurement of an angle/slant, the user has to place the bottom face of Slant 100 against the surface of the object, then rotate the dial until the bubble in the vial is centered between the rings, then read out the position of pointer shown on the dial plate. Both up and downward slope measurements are available. The unique advantage of this instrument is that the pointer remains in locking position even after the instrument is removed from the object's surface, so that the user can read accurate angle/slant with ease. For inclination measurement in construction industry, use face (b) against the surface of the object and follow the same procedure. For setting of an angIe/slant required, rotate the dial pointer up to the angle/slant required and set the object to the surface (a) of Slant 100, move them both in the incorporated style until the bubble in the vial is centered between the rings. Slant 100 is equipped with conversion table for rises to slants and rises to angles. Specifications are: range of measurement: 130?-0-130? (50?- 90?- 0 - 90? - 50?); ratio between surface (a) and rise (N): between 01 to 0.8 (every 0.05 notch) and 1.00, 1.20, 1.50, 1.80 to 2.00; and tolerance: ?1?.