• Systems and Controls (Sangli) Private Limited

Digital Timer

System Controls offers digital variable time control timer. It is useful in processing units where time controlling is important such as chemical, plastics, textile, paper, photo processing, metal processing, etc. The timer range varies from 2 to 4 digits for minutes, seconds and hours such as 9.99 min, 99.9 min and 999 min. It works on down count mode from the preset time. It comes in thumbwheel preset or pushbutton (keyswitch) preset type. The timer is modifiable for up counting mode. It works on a quartz crystal giving fine accuracy of time. In case of mains failure, the timer starts from the beginning. It provides 2 C/O relay contacts at the output terminal for 10 Amp resistive load. It can be of On delay type or Off delay type. The box size of the instrument is 96 x 96 x 110 mm normally and can be made in 72 x 72 x 110 mm as per the requirements and panel cut out size is 90 x 90 mm and 65 x 65 mm, respectively. The company also offers the instruments (sequential time controller) for special applications.