<ul style="margin-top:0cm" type="disc"> <li class="MsoNormal"><span lang="EN-GB">Kusam-Meco has added a new TRMS multifunction power meter transducer to its range of Power instruments. KM-CPM-12D is a DIN rail mounting power meter with high accuracy measurement for single phase &amp;amp; three phase system. <o:p></o:p></span></li> <li class="MsoNormal"><span lang="EN-GB">The display is 128 x 64 dot matrix LCD display with white backlight. It is controlled by 4 operating keys. Input Voltages are 40 ~ 400V (line to Neutral). 60 ~ 600V (Line to Line). PT primary ratio 100 ~ 1200KV secondary ratio 50 ~ 500V. CT input 1A or 5A or 1/5A programmable. <o:p></o:p></span></li> <li class="MsoNormal"><span lang="EN-GB">It can accept external current clamps which have secondary 1A or 5A or 333mV output. CT Primary programmable 1 to 9999 Amps. <o:p></o:p></span></li> <li class="MsoNormal"><span lang="EN-GB">It measures all power parameters such as voltage (phase-neutral) (phase-phase) &amp;amp; Avg. voltage, current (each phase &amp;amp; avg.) active power (each phase &amp;amp; sum), reactive power (each phase &amp;amp; sum), apparent power (each phase &amp;amp; sum), power factor (each phase &amp;amp; Average), frequency, active energy (import &amp;amp; export), total energy, net energy, reactive energy, (import &amp;amp; export), total &amp;amp; net; THD% voltage 31st THD each phase, Average; THD/ Current 31st THD each phase, average. <o:p></o:p></span></li> <li class="MsoNormal"><span lang="EN-GB">Voltage &amp;amp; current phase or diagram, demand, maximum demand of current &amp;amp; power with time stamp. Min / Max values with time stamp, Data logging with recording&nbsp;&nbsp;&nbsp;&nbsp; interval can be set. 50 of 88 parameters can be recorded simultaneously. It has RS485 port to transmit data in Modbus RTU mode. It has function to calculate CO2(kg). For energy output it gives pulse output.<o:p></o:p></span></li> <li class="MsoNormal"><span lang="EN-GB">It has optional feature to record time of use data(4 seasons, 8 tariff settings per day, per year or upto 5years. For DG Sets it can also record operation hour, Run hour. It has a fast sampling rate of 128 point / cycle. It can be used for 1P2W, 1P3W, 3P3W (1/2/3 CT) 3P4W Balance/unbalanced load. 247 units can be connected to RS485 Modbus RTU. It has 2MB flash ROM.<o:p></o:p></span></li> </ul>