Schedule a Call Back
Weight Indicator
Weight Indicator
SOC Technology Based System, PR430A connects with a single set of 1 to 4 strain gauge load cells. It supplies 10V DC excitation and amplifies and conditions the resultant return signal. From this signal and from stored control and calibration data it generates a gross/net weight signal for display and for transmission of the gross weight via an analogue output.
Product & Technology News
- Reactor Weighing
- Hopper Weighing
- Vessel Weighing
- Tank Weighing
- Silo Weighing
- Bin Weighing
- Model No: PR430A AC powered, add suffix ‘D’ for DC powered option ie PR430A-D
- Power Supply: Universal fused power supply 85-264VAC, or 9-36VDC (PR430A-D), Power consumption 10VA maximum
- Load Cell Excitation: 10V DC @ 125mA max, 1 to 4 x 350 Ohm load cells may be connected in parallel, 4 or 6 wire for volt drop compensation in long cables.
- Input Range: 0-20mv min, 0-2.5v max
- Filter: 0.2 to 20Hz active low pass
- Resolution: Internal : 16,000,000 counts, External : 65,000 divisions
- Analogue Output: 4-20mA into 500 ohms max, (or 0-10V) 16 Bit resolution. Drift < 5ppm/ºC
- Display: 14mm high character green LED
- Trip Relay Outputs: 240V AC or 30V DC maximum 5A rated
- Enclosure: Panel mounting DIN case, IP65 front seal, 144mm wide x 72mm high x 132mm deep Panel cut-out 138mm x 68mm
- Environment: Operate 0-50ºC, 20-80% RH non-condensing, Storage -40 to 80ºC
- Load Cell Weighing with display resolution to 65000 divisions, (16,000,000 internal).
- Standardised Gain, enabling replacement without the need for vessel emptying or re-calibration.
- Adjustable filtering, down to 0.2Hz, for elimination of the effects of mechanical vibration.
- Preset Trip Outputs.
- Industry standard 4-20mA or 0-10V Analogue Output.
Weight Indicator - PR430A
Weight Indicator
Indicators
Indicating Instruments
SOC Technology Based System
Reactor Weighing
Hopper Weighing
Vessel Weighing
Tank Weighing
Silo Weighing
Bin Weighing
Products from Kehkashan Automation Private Limited
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines
