• Accurate Test Equipments and Engineers

Hydraulic Dynamometers, Sluice Gate Type

Accurate Test Equipments & Engineers offers the ATE range of dynamometers are basic, robust, manual control unit where cost is of prime consideration and simplicity of operation is paramount. They are bi-directional which is achieved by rotating the whole dynamometer to 180 degrees. The ATE range is not suitable for transient testing and the load is controlled by varying the quantity of water circulating in the vortex chamber. This is achieved by a moving sluice gate in the dynamometer casing.

The ATE range is available with alternative control options :
1) Manual control for operation local to the dynamometer
2) Remote control via increase / decrease push buttons.
3) Throttle is controlled by push / pull cable arrangement.

Speed is measured by a pulse sensor mounted adjacent to a 60 tooth wheel on the coupling while torque is measured by a high accuracy strain gauge load cell mounted between the Trunion bearings, supported casings and bedplate. The ATE instruments Load Indicator, RPM indicator, BHP/KW indicator can be used with the PB range for data monitoring. These instruments are available with computer interface. Numerous options are available such as drive shafts, guards, calibration systems, engine mounting frames, circulation pumps and cooling towers.