• Pune Gasparts & Services Private Limited

LP Gas Flow Meters

High pressure LP gas flow meters from Maharashtra Multi Distributors are available with several technical characteristics. These include: principle of velocity measurement, for internal measurement (without verification); sizes Q16 up to Q400, connections Dn 40, 50, 80 and 100, different Q-sizes per nominal width: DN 40: Q 16 up to Q 65, DN 50: Q16 up to Q 100, DN 80:Q 65 up to Q 250, DN 100: Q 100 up to Q 400; operational pressure max 6 bar; meter without mono-pipe fitting can be calibrated; pressure extraction connection inside the meter; counting device is in a gas free space; low starting value; high measurement stability and operational security due to high-quality; wear resistant components; self lubricating ball bearings; designed for simple servicing (measurement-cartridge principle); standard integrated flow strainer; short straight inlet lengths (2 x DN); and operation temperature range – gas temperature, 10°C up to +60°C, ambient temperature, 20°C up to +70°C. Options: over-run brake – mechanical over-run brake without measuring range restriction for intermittent operation; pulse generators – 2 XLF-IPG, 1X can be retrofitted without breaking the manufacturing seal – MF-IPG, HF-IPG; and temperature sensor pockets in the mono-pipe fitting. Mounting and maintenance: mounting/dismounting of the meter element possible without disconnecting the monopipe fitting, the mono pipe fitting remaining in the pipe network enables mounting/dismounting of the meter element without tension from the pipe network, can be installed in any position from horizontal to vertical (turbine axis not suspended and roller counter axle always horizontal). Norms: developed and produced according quality standard ISO 9001.