• Katlax Enterprises Private Limited

RH, Pressure & Temperature Indicator

Single Set Point Temperature Controller

The Single Set Point Temperature Controller is available with a sensing range of 0 to 350 Deg C. This controller has the capacity to control either the highest point of temperature or the lowest point of temperature. It has a panel mounting facility and accepts RTD, J type or K type thermo couple as a temperature sensing device. The unit has wide applications in temperature controlled ovens, multiplexes, malls, air conditioning plants and clean room applications, etc.

 

Humidity, Pressure, Temperature Indicator

The Indicator displays Humidity (0 to 100%), Temperature (-50 to 150 Deg C) & Pressure (0 to 100 Pa), is panel mounted in an ABS plastic housing and has a bright seven segment display of 0.5 inch each in a row. It has wide applications in clean room, air conditioning, hvac, temperature controlled oven, pharmaceutical machinery, etc.

 

Humidity, Temperature Indicators

This Indicator comprises of a 3 digit, 4 inches bright red display and has a ceiling hanging & mounting arrangement. It has a scrolling display of Humidity & Temperature, at a 5 second interval with a visibility of up to 15 meters. The display ranges from 0 to 100 % Humidity & - 50 to 150 deg C Temperature. ASIC chip is used as a sensing device. It can communicate on MODBUS protocol via RS485 serial interface. This unit has unique applications in air conditioning plants, commodity cargo and multiplexes, malls, etc.