• A L Hutaib Trading Co Pioneers Engineers

Welding Torch

A. L. Hutaib Trading Company offers wide range of Welding Torches are used to weld metals. It can be identified by having only one or two pipes running to the nozzle and no oxygen-blast trigger and two valve knobs at the bottom of the handle letting the operator adjust the oxygen flow and fuel flow.

Cutting Torch
A cutting torch head is used to cut metal. It is similar to a welding torch, but can be identified by the oxygen blow out trigger or lever. The flame first heats the metal until it is cherry red. Once this temperature is attained, oxygen is supplied to the heated parts by pressing the "oxygen-blast trigger". This oxygen reacts with the metal, forming iron oxide and producing heat. It is this heat that continues the cutting process. The cutting torch only heats the metal to start the process; the burning metal provides further heat.

Rose-Bud Torch
A rose-bud torch is used to heat metals for bending, straightening, etc. where a large area needs to be heated. It is called as such because the flame at the end looks like a rose-bud. A welding torch can also be used to heat small area such as rusted nuts and bolts. In this case, no filler rod is used with the torch.

Injector Torch
A typical oxy-fuel torch, called an equal-pressure torch, merely mixes the two gasses. In an injector torch, high-pressure oxygen comes out of a small nozzle inside the torch head so that it drags the fuel gas along with it, via venture effect.