• Anand Engineering Works

Faceting And Polishing Machine

Anand Engineering Works offers Faceting And Polishing Machine. The machine base is a tabletop design fitted with a laminated mica top on sturdy cast iron legs with steel pipes/angles providing the necessary support. The machine is fitted with 2 housings in a cast iron base bolted to the tabletop. 1/2 h.p. 1440 r.p.m. Single-phase 220 volts motor AC 50 cycle. This motor is fixed on a removable base plate. The two housings contain two separate shafts driven by the same motor. One housing is used for fixing the diamond coated grinding lap of 8" dia. This housing is fixed. The other housing is for fixing the polishing lap of 8" dia. The machine comes with FOUR faceting equipments, which help in maintaining the angles. Each of these facetors has a cheater adjustment for fine tuning the alignment. The dop sticks are fitted with the indexing attachment. The machine comes fitted with light attachment and arm rests. The coolant attachment is optional. This is the most versatile faceting and polishing machine for Gems. This is an ideal machine for mass production of gems wherein the work is dived between Four operators. Two operators are faceting the stone sand the other two are polishing the stones. The Gemstone is fixed on to the Brass dopstick with the help of dopping wax. This dopstick comes with an indexing attachment. One end of the dop stick has the stone and the other end of the dopstick is rested in the respective slot provided in the facetor unit. These slots provide for different angles at which the stone is required to be cut and polished. Advantages: This machine is capable of simultaneous faceting and polishing and therefore saves precious time in changing laps for faceting and polishing, The indexing attachment is fitted on the dop stick itself and as such this affords a full view of the stone, The individual expertise of the operator with respect to faceting or polishing can be best utilized to make them do what they are better at.