• Trikmanconser Enterprises

Tube Bending Tools

Trikmanconser Enterprise offers Tube Bending Tools.
Manual
Trikman manual tube bender are table mounted type and capable of bending of tubes from dia 6 to 12 mm. With help of changing the pulleys and tube gripper according to the diameter and bend center line radius. Tube bending distance from the end is controlled with help of six stoppers. Angle between two bend radius in third degree is controlled by tube clamping cum indexing device.
Electrical
Trikman Electromechanically driven tube bender. These machines are powered by AC/DC power supply. Tube bending head is driven by gearbox and motor. Tube gripping is done by hydraulic powered cylinder . These machines are capable of bending from dia 16mm to 32mm with light size of machine. Unlike manual tube bending these machines also can bend 6bends from center line radius 40 to 150 mm. Indexing mechanism to manipulate 3rd axis of bends is done manually. Distance between 2 bends is also controlled by manual stoppers . Mandrel provision and retraction of mandrel is controlled by hydraulic powered cylinder. Bending angle is controlled by electromechanical device further controlled by PLC provided with the machine. Human machine Interface is done by panel provided to enter bending angle for the respective stage of bend. Machine can store 50 tube bending programs. Each program can be called and run. Changing of tube bending pulleys and tube gripper can be done very quickly with the quick change mechanism given with the machine.
Pneumatic/Hydraulic
Trikman Hydraulic power driven tube bender. These machines are powered by AC/DC power supply. Tube bending head is driven by servo hydraulic controlled motor. Tube gripping is done by hydraulic powered cylinder. These machines are capable of bending from dia 16mm to 32mm with light size of machine. Unlike manual tube bending these machines also can bend 6 bends from center line radius 40 to 150 mm. Indexing mechanism to manipulate 3rd axis of bends is done manually. Distance between 2 bends is also controlled by manual stoppers. Mandrel provision and retraction of mandrel is controlled by hydraulic powered cylinder. Bending angle is controlled by hydraulic servo device further controlled by PLC provided with the machine. Human machine Interface is done by panel provided to enter bending angle for the respective stage of bend. Machine can store 50 tube bending programs. Each program can be called and run. Changing of tube bending pulleys and tube gripper can be done very quickly with the quick change mechanism given with the machine.