• Jasmer Machine Tools

Milling Machine

Jasmer Machine Tools offers Milling Machine, UM-1/VM-1. Specifications: table - 1000 x 230 mm; t-slots - 3 x 12; longitudinal traverse - 500 mm; cross traverse - 175 mm (manual); vertical traverse - 300 mm (manual); milling head spindle taper - ISO-40; spindle speed - 6 (45, 90, 175, 275, 510, 1000); arbor diameter - 1"; max swing of vertical - 90º (only for vertical models); feed range - 9 (17, 22, 28, 40, 44, 47.5, 64, 96, 163); rapid - 650 mm/pm; power rate - spindle motor 1 HP/1400 RPM, feed motor 1 HP/1400 RPM, coolant pump - 0.1 HP/2800 RPM; the base of heavy rigid casting serving also as coolant tank; it provides a suitable platform for robust operation; the column is again of rigid built; traces are hand scraped and lapped/ground; the heavy knee is made as a box and rests on a vertical column equipped with thrust bearing and protected from dirt and chips by telescopic covers. The moveable parts inside are protected foreign matter and coolant, the knee being closed at the upper end. All the hand wheels are relatable. The automatic feeds in all three directions are limited by means of adjustable feed trip dogs. Standard equipment: electric motor, electric coolant pump with fitting, electric panel, and one inch dia arbor.