• Jasmer Machine Tools

Milling Machines

Jasmer Machine Tools offers Milling Machine, UM-1.5/VM-1.5. The base is of a heavy rigid casting, which also serves as a coolant tank. It provides a suitable platform for robust operation. The column is rigidly built. The heavy knee is made as a box and rests on a vertical column equipped with thrust bearing and protected from dirt and chips by telescopic covers. The moveable parts inside are protected foreign matter and coolant, the knee being closed at the upper end. The entire hand wheel is relatable. The automatic feed in all three directions is limited by means of adjustable feed trip dogs. The worktable has 3 T-slots and is provided with coolant channels. A graduated scale is placed in order to obtain an exact angle adjustment up to 45 at either side. The working pressure of the table lead screw is taken up though pressure thrust bearing. Power drive is through an electric motor flange mounted at the rear of the machine. Clutch levers are placed within reach on both sides of the column. The driving shaft and spindle shaft are bedded in roller and ball bearing respectively. Technical Specifications: table: 1100 x 280 mm; T-slots: 3 x 16; longitudinal traverse: 660 mm; cross traverse: 280 (manual); vertical traverse: 430 (manual); milling head: spindle taper: ISO-40; spindle speed: 6 (45, 90, 175, 275, 340, 635, 1150 rpm); arbour diameter: 1"; maximum swing of vertical: 90°; feed range: 9 (17, 22, 28, 40, 44, 47.5, 64, 96, 163 rpm); rapid: 650 mm/pm; power rate: spindle motor: 2 hp 1400 rpm feed motor: 1 hp, 1400 rpm; and coolant pump: 0.1 hp 2800 rpm.