Schedule a Call Back
Angle Plates
Angle Plates
JASH C.I. Angle Plates provide a practical means for clamping and holding work in vertical position for layout, tooling and machining. Angle Plates are also used as a vertical reference for inspection. They make an ideal fixture for shaping, planning milling, grinding, drilling and boring operations.
Â
|
Size in mm |
Tolerances of Standard Size Angle Plates in Microns |
T-Slot Details of T-Slotted Angle Plates | ||||||
|
L x B x H |
Grade |
Flatness |
Squareness |
Parallelism
|
Squareness of end faces with respect to exterior faces as measured over dimension L |
Size of
T-slots |
No. of
T-Slot |
Pitch of
T-Slots |
|
125 x 75 x 100 |
1 |
5 |
10 |
13 |
13 |
10 |
2 |
40 |
|
2 |
25 |
50 |
63 |
63 |
||||
|
175 x 100 x 125 |
1 |
5 |
13 |
15 |
15 |
12 |
2 |
50 |
|
2 |
25 |
50 |
63 |
63 |
||||
|
250 x 150 x 175 |
1 |
8 |
15 |
18 |
18 |
12 |
3 |
50 |
|
2 |
38 |
75 |
88 |
88 |
||||
|
350 x 200 x 250 |
1 |
8 |
18 |
18 |
20 |
14 |
3 |
80 |
|
2 |
38 |
75 |
88 |
88 |
||||
|
450 x 300 x 350 |
1 |
10 |
18 |
20 |
20 |
18 |
3 |
100 |
|
2 |
50 |
100 |
113 |
113 |
||||
|
600 x 400 x 450 |
1 |
10 |
20 |
23 |
23 |
18 |
4 |
100 |
|
2 |
50 |
100 |
113 |
113 |
||||
|
600 x 600 x 1000 |
2 |
50 |
140 |
113 |
113 |
22 |
5 |
200 |
|
1500 x 900 x 1500 |
2 |
70 |
300 |
300 |
300 |
28 |
7 |
200 |
|
Special Sizes for Angle Plates |
Special Sizes for
| |||||||
|
75 x 75 x 75 |
225 x 225 x 225 |
900 x 600 x 700 |
320 x 500 x 1450 | |||||
|
100 x 100 x 100 |
250 x 250 x 250 |
900 x 900 x 1600 |
900 x 600 x 700 | |||||
|
125 x 125 x 125 |
300 x 300 x 300 |
1000 x 600 x 1200 |
900 x 900 x 1600 | |||||
|
150 x 150 x 150 |
500 x 500 x 500 |
1200 x 1000 x 1500 |
1500 x 1200 x 2000 | |||||
|
200 x 200 x 200 |
600 x 600 x 600 |
1000 x 1400 x 2500 |
||||||
- Â Made generally as per IS: 2554, Standard Angle Plates are webbed and provided with cored slots on both working faces to facilitate clamping.
- Made from close grained plain cast iron conforming to grade FG 220 of IS:210 (equivalent to GG20/FT20/30-A). Higher grades also offered on request.
- Casting stress relieved to relieve internal stresses. Smaller sizes offered with Grades 1 & 2 accuracies and larger sizes offered in Grade 2 accuracies.
- Hand scraped surface finish for Grade-1. Finish machined / rough ground / rough scraped surface finish for Grade 2 accuracy.
- Precision Angle Plates in standard sizes and with accuracies as per IS: 6973 but made from the same patterns as those for the standard sizes as per IS: 2554, are made upon request. Sizes offered are maximum up to 600 x 400 x 450 mm.
- Vertical face also provided with machined T-slots and the base / table face is having cored slots. Other constructional features are similar to those in case of standard angle plates as per IS: 2554.
- T-slot dimensions conform to IS: 2013. T-slots are fixing T-slots with tolerance H12 and are machined parallel to base and to each other within 0.1 mm per meter.
- Squareness tolerances are as shown in table. Other tolerances are generally as per IS: 2554. Higher tolerances for squareness as well as for T-slot can be offered upon request.
- Standard sizes, respective T-slot details and squareness tolerances are as stated in table.
- Special large size Angle Plates can be offered upon request, with accuracies as per DIN: 875.
Products from Jash Precision Tools Limited
Verified
Verified
Verified
T-Slotted Floor Plate / Bed Plate / Test Bed
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines
