Roll Turning Lathe Machine, PL 760/910/1060
Roll Turning Lathe Machine, PL 760/910/1060
Premier Lathe Manufacturing Company offers Roll Turning Lathe Machine, Model PL 760/910/1060.
Product & Technology News
| Model | PL - 760 | PL -910 | PL -1060 |
| Capacity | |||
| Center Height | 28†- 710 mm | 34†- 860 mm | 40†- 1010 mm |
| Swing over bed | 54†- 1370 mm | 66†- 1675 mm | 78†- 1980 mm |
| Swing over cross slide | 42†- 1050 mm | 54†- 1350 mm | 64†- 1625 mm |
| Swing in gap | 76†- 1930 mm | 88†- 2235 mm | 100†- 2540 mm |
| Bed | |||
| Bed Type |
2V & 2Flat (Plano Type) | 2V & 2Flat (Plano Type) | 2V & 3Flat (Plano Type) |
| Bed Width |
30†- 760 mm | 36†- 910 mm | 42†- 1060 mm |
| Length of gape in Front of
face plate |
12†- 300 mm | 12†- 300 mm | 12†- 300 mm |
| Total length of bed |
Admit between center | Admit between center | Admit between center |
| 14’ feet / 14’ feet /15’
feet |
2000 mm | 2000 mm | 2000 mm |
| 18’ feet / 18’ feet / 18’
feet |
3000 mm | 3000 mm | 3000 mm |
| 21’ feet / 21’ feet / 21’
feet |
4000 mm | 4000 mm | 4000 mm |
| 24’ feet / 24’ feet / 25’
feet |
5000 mm | 5000 mm | 5000 mm |
| 27’ feet / 27’ feet / 28’
feet |
6000 mm | 6000 mm | 6000 mm |
| 31’ feet / 31’ feet / 31’ feet | 7000 mm | 7000 mm | 7000 mm |
| Head Stock | |||
| Number of spindle speed |
6 | 6 | 6 |
| Range of spindle speed |
10 - 150 RPM | 10 - 150 RPM | 10 - 150 RPM |
| Spindle nose dia. |
6.1/4†- 160 mm | 6.1/4†- 160 mm | 6.1/4†- 160 mm |
| Spindle bore |
4†- 100 mm | 4.3/4†- 120 mm | 4.3/4†- 120 mm |
| Spindle threads |
6 TPI | 6 TPI | 6 TPI |
| Taper in spindle sleeve | MT - 6 | MT - 6 | MT - 6 |
| Carriage & Compound |
|||
| Cross slide dimension |
16†- 400 x 28†- 710 mm |
16†- 400 x 30†- 760 mm |
18†- 455 x 36†- 910 mm |
| Cross slide travel |
28†- 710 mm | 34†- 860 mm | 40†- 1010 mm |
| Compound slide dimension |
21†- 530 x 9†-225 mm | 21†- 530 x 9†-225 mm | 24†- 610 x 10†- 250 mm |
| Compound slide travel |
12†- 300 mm | 12†- 300 mm | 12†- 300 mm |
| Tool post square |
9†- 228 mm | 9†- 228 mm | 10†- 250 mm |
| Tool shank section | 1.1/2†- 38 mm x 1.1/2†- 38 mm | 1.1/2†- 38 mm x 1.1/2†- 38 mm | 1.1/2†- 38 mm x 1.1/2†- 38 mm |
| Tail
stock |
|||
| Spindle ram diameter | 5†- 125 mm |
5†- 125 mm | 6†- 150 mm |
| Spindle ram travel |
20†- 500 mm | 20†- 500 mm | 20†- 500 mm |
| Taper in tail stock quill | MT - 6 | MT - 6 | MT - 6 |
| Threads |
|||
| Number of threads range in metric | 24 |
24 |
24 |
| Number of threads range in
inch |
43 | 43 | 43 |
| Number of pitch range in
metric |
0.5 to 15 PITCH | 0.5 to 15 PITCH | 0.5 to 15 PITCH |
| Number of pitch range in
inch |
2 to 60 TPI | 2 to 60 TPI | 2 to 60 TPI |
| Lead screw diameter |
2†- 50 mm | 2†- 50 mm | 2†- 50 mm |
| Lead screw threads | 2 TPI | 2 TPI | 2 TPI |
| Electricals |
|||
| Motor Recommanded | 10 H.P. | 15 H.P. | 20 H.P. |
Chuck Back Plate,
Tool Post Spanner, Motor Pulley, Motor Channel, Change Gear Set, Fix Spanner
Set, Allen Key Set & Oil Cane.
Â
Â
Face Plate, Steady
Rest, Follow Rest, Carrier Plate, Rear Tool Post With Extended Cross Slide,
Coolant Pump with Tank And Fittings, Taper Turning Attachment, Machine Lamp,
Electric Motor, R/F Switch, Motor V- Belt, Dog Chuck, True Chuck, Customized
Center Height of Machine.