Schedule a Call Back
CNC Lathe System
CNC Lathe System
CNC Lathe System, VPL-CNC-4410, which standard equipment has 90 VDC motor with electronic speed controller, a 2.75" (70mm) x 6.0" (152mm) crosslide, pulleys, belt, faceplate, lathe dog, two dead centers, three hexagonal keys, sharpened high-speed steel cutting tool, eight-foot, three-wire power cord and instruction booklet. In addition, the model 4410 lathe has a 24" (610mm) bed that has 17" (431mm) between centers, a 2.5" (63mm) resettable "zero" handwheel on the leadscrew, two 2" (51 mm) resettable "zero" handwheels on the crosslide and feed screw and a rocker tool post substituted for the standard tool post used on the shortbed lathes.
Product & Technology News
- Swing over bed: 3.50" (90 mm)
- Swing over carriage: 1.75" (45 mm)
- Distance between centers: 17.00" (430 mm)
- Hole through spindle: 405" (10 mm)
- Spindle nose thread: 3/4"-16 T.P.I.
- Spindle nose taper: #1 Morse
- Travel of crosslide: 4.25" (110 mm)
- Taper of tailstock spindle: #0 Morse.
- Protractor graduations: 0° to 45° by 5°
- Handwheel graduations: 0.001" (.01 mm)
- Length overall: 32.25" (820 mm)
- Width overall: 8.75" (220 mm)
- Height overall: 8" (200 mm)
- Shipping weight: 30 lb. (13.6 kg)
- Motor: 90 Volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz.
- Spindle speed range: 70-2800 RPM continuously variable by electronic speed control
- CNC stepper motor holding torque: 136 oz-in
- Maximum CNC travel speed, X and Z: 22 inches/min
- Electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes.
- There is a second pulley position available that offers extra torque at low RPM if needed.
Products from VPL Infotech & Consultants
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines