• The Standard Agro Engineers

Petrol/kerosene/diesel run engines

The sump capacity of these engines is 570 ml. Starting of the engine is by rope and pulley (recoil is the optional feature). These units possess centrifugal fly type Governor and forced air-cooled system for cooling. Direction of rotation is anticlockwise at drive end. These engines are suitable for compressors (up to 30,000 l/hr, 16 mt head), gensets (up to 1000 VA), vibrators (18,000 vib/min), self-priming pumps (2 inch x 2 inch) and HTP sprayers (12 l/min at 350 psi). Optional accessories of the engine include: choice of PTO shaft ends; crankcase for close coupling; idling speed control lever; cable operated variable speed control; two compartment tank for operation in kerosene; cam shaft drive at half speed; recoil starter and noise reduced silencer. Technical specifications: Model: SAE12 Fuel: Petrol/Kerosene/Diesel (Petrol start) Number of cylinders: 1 Bore x stroke (mm): 55 x 50 Continuous HP: 2 HP @ 3000rpm; 3 HP @ 3400rpm Maximum torque (Nm): 5.8 @ 2800rpm Compression ratio: 5.6/4.36 Weight (kg): 17 Ignition timing: 24 degrees BTDC Ignition system: electronic Spark plug: MICO W95T1/M45Z8 Fuel capacity: 2.5/2 + 0.5 (petrol); 4.5/3.5 + 1 (petrol) Fuel consumption: 900 ml/hr (approximately) Engine oil: 20 W 40