• Mech Tex Manufacturing Company Private Limited

DC Geared Motors

Model DC25 is a precious metal brush DC motor that is used in combination with many Mech Tex gear heads. In conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7 and GB8 gear heads. Depending on the application, output speed, load applied, etc., the standard gearheads used in the type of gearhead can be selected. Various types of gears, i.e., poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque required is low. Linear drive is possible with gearheads GB4, GB7 with M6 x 1 mm pitch screw. The linear guide and screw arrangement can be done only on special request. Mech-Tex can offer various types of gearboxes to suit standard DC motors available in market. The selection of the reduction ratio should be made according to the desired gearbox revolution speed output, keeping in mind that this chang