• Ronuk Industries Limited

Compositions For Buffing & Polishing

Ronuk Industries manufactures a complete range of chemicals for: buffing and polishing, electroplating, phosphating, degreasing, pickling, printed circuit board plating, chemical polishes, and effluent treatment. The base metal has to be prepared by buffing, glazing and polishing prior to being able to achieve good plating at lower thickness. The Ronuk buffing range encompasses conventional buffing soaps to liquid buffing compositions for different applications, i.e., metals as well as plastics and ABS. Brushing Emery-BE is meant for very rough mild steel components to be used on belt or fibre or sisal. For mild steel can be used with R:30 or AT or RR to obtain superior finishes. Ronuk R:30 is a popular product and useful for non-ferrous metals, i.e., gold, silver, copper and brass and also useful for ABS. In combination with brushing emery or RR for mild steel, Ronuk `AT’ special: for aluminium, ABS and zinc die castings; Ronuk `RR’ greenish ash: stainless steel watch components and useful in combination with brushing emery or mirror or Ronubuff RR. Ronuk plastic No. 1 is for final finishes of plastic and silver. Ronuk mirror: final finish of stainless steel with Ronusteel for chrome buffing or used alone. As the base metal merits, Ronuk RR buffing composition (grey): for combinations with brushing emery specially for rims and cycle components. Ronubuff RR: for nickel and chrome burning useful after hard chrome plating. Ronubuff Bluestar (Big): useful for stainless steel in combination of Ronusteel and an alternative peerless/Alps polish for polishing of mild steel, copper, brass and nickel. Ronubuff Bluestar (Small): for watch industry for finishing and glazing of stainless steel. Ronubuff-white: for buffing of hard chrome and with combination of mirror on stainless steel. Ronuksteel: for stainless steel, can be used for final finish in combination with mirror or for cutting/glazing with Ronubuff RR grey and/or brushing emery, LS-10 liquid/solid: for horn, marble plastic, buttons, spectacle frames and ABS and methacrylate bakelite components, phenolic moulding. Liquogleam series: liquid spray buffing compounds, L-12 for polishing on mild steel, L-14 for final finish of brass, copper and gold, L-18 for stainless steel final finish and chrome burning, L-20 for initial polishing on mild steel, L-30 brass, copper and nickel polishing.