Home
BMT â€“ 80 Horizontal Boring Milling and Facing Machine

BMT â€“ 80 Horizontal Boring Milling and Facing Machine

Bharat Machine Tools (Jamnagar) Private Limited

BMT â€“ 80 Horizontal Boring Milling and Facing Machine

Bharat Machine Tool offers Horizontal Boring Milling and Facing Machine. The headstock has three concentric spindles the outer spindle is hollow. Its front end is fitted with facing head. It runs in a taper bore bronze bearing. The correspondence portion of the spindle has a matching taper. The running radial clearance is obtained by axial adjustment of the spindle. The drive to the boring spindle is through a key fitted on the sleeve, which engages with a key way along the entire length of the boring spindle to rotate and also travel axially in the sleeve.

Contact Supplier Add to MyIPF Request a Quote

Product & Technology News

Specifications
Features

New Page 1

Diameter of the Work Spindle	80 mm
Facing Slide Travel	200 mm
Speed Range I	36 steps, 0.15 - 40
Feed per minute	36 steps, 0.44-113
Maximum weight of work piece	2000Kgs
Maximum diameter - Boring	450 mm
Maximum diameter - FacingÂ	800 mm
Vertical traverse of head stock	900 mm
Facing Head Diameter	500 mm
Table Movement crosswise	1000 mm

Low friction transmission makes maximum power available at the tool for high material removal
Very wide range of speed and feeds to take care of all possible machining problems â€“ from the smallest to the largest working diameters
High quality design of the bearing system for the sleeve and outer hollow spindle.
All operating elements are ergonomically arranged
Close manufacturing tolerance due to precision scraped / ground slide ways and fine positioning by the dial gauges, vernier or digital readout