• Mec Shot Blasting Equipments Private Limited

Wet Blaster

Mec Shot Blasting Equipments Private Limited offers Wet Blaster. Wet blaster works on induction-suction principle of blasting. The most important point in wet blasting is its ability to use very fine abrasive, as fine as 5 microns. Fine abrasive particles are suspended in liquid, usually water and then pumped to a nozzle as slurry. At the nozzle, the slurry is introduced into air-stream and propelled against the job. The glandless slurry pump is used to feed the slurry at positive pressure into the blast gun. The wet parts of a pump are of thermo set plastic material for corrosion resistance. Wet blaster machine is useful in tool room to remove feather burrs from multi tooth cutting tools such as milling cutters, broaches and taps eliminating hours of hand honing time. It deburrs the intersecting holes in precision parts which are inaccessible by any other method. The finest machine surface can be treated without damage to sharp edges and exact tolerances.