Input Specifications:

• Voltage: 90-132 / 180-264VAC (Selectable)
• Frequency: 47-63Hz
• Leakage: 200uA Max @ 264 VAC
• Hold-Up: >16ms @ 115 / 230 VAC Full Load
• Efficiency: > 70% Typical (Including OR'ng Diode Function)
• Harmonics: EN61000-3-2 Class D Compliant (>0.95 PF)
• Input current: 6.5A Max Continuous
• Isolation: 4kVAC Withstand

 

General Specifications:

• Operating Temp: 5~40°C, Full Load
• Storage Temp Operating: -40 ~ +85°C
• Humidity: 10~90% Non-Condensing
• Storage Humidity: 5~95% Non-Condensing
• Cooling: Convection Cooled
• Vibration: 10-55Hz, 2G, 3min period/60min each (3 axes)
• Shock: 20G Peak Acceleration
• Reliability: >100k Hours (Full Load & 25°C Operation)
• Over Temp: Alarm goes high when internal temperature exceeds maximum
• Size: 350 x 296 x 94mm / 13.78 x 11.65 x 3.70"

 

Output Specifications:

• Adjustment Range: Fixed at Factory
• Minimum Load: None Required
• Line Regulation: ±2% Max over entire input range
• Load Regulation: ±2% maximum
• Ripple: ±1% (20MHz)
• Over Current: 115-135% (Auto-Recovery)
• Over Voltage: 105-115% (recycle input to reset)

 

Electromagnetic Compatibility:

• Emissions: EN55022 Level B (Conducted)
• Electrostatic Discharge: EN61000-4-2, 4kV Contact / 8kV Air
• Radited Susceptibility: EN61000-4-3, 26-1000MHz, 10V/M, 80%AM
• EFT / Bursts: EN61000-4-4, 2kV
• Surges: EN61000-4-5, 2kV Earth, 1kV Line-Line
• Conducted Immunity: EN61000-4-6, 0.15-800MHz, 10V 80%
• Voltage Dips: EN61000-4-10, 95% Dip & 10ms, 30% Dip & 500ms
• Voltage Interruptions: EN61000-4-11, 95% reduction, 5ms
• Fluctuations & Flicker: EN61000-3-3

 

Status & Control:

• DC Remote On/Of: High signal enables output DC Outputs
• AC Remote on/Of: High signal enables output AC Outputs
• Current Share: Single Wire Parallel (±10% accuracy)
• Fan Fail: High Signal indicates Fan Failure
• Over Temp: Signal goes high to indicate over-temperature warning
• Over Voltage: Signal goes high to indicate over-voltage operation

• 400 Watt DC Output Power Supply with AC Distribution Panel
• Designed for Ultrasound Application
• Chassi Mount / Convection Cooled Package
• 12V Output to Power and Monitor 12VDC Fans in system
• Internal AC Transformer provides 115 / 230 VAC Output (selectable)
• Measures 350 x 286 x 84mm / 13.78 x 11.26 x 3.30"
• Front Panel Visual Indicator LED's
• Status and Control Signals including:
  · Enable (DC Outputs and AC Distribution Panel)
  · Over Voltage/Current/Temperature Alarms
  · Current Share
  · Fan Fail Signal (Remote Fans)