Schedule a Call Back
Single Phase Servo Voltage Stabilizer
Verified
Verified
Verified
Verified
Verified
Single Phase Servo Voltage Stabilizer
Hindustan Power Products (P) Ltd. offers Single Phase Servo Voltage Stabilizer.
- Rating: 5 kVA to 75 kVA
- Input Voltage Range: 4 standard Ranges or custom built
- Over-Load Capability: up to 150 % momentarily
- Output Voltage: Standard 220 / 230 / 240 V. or as per customer requirement
- Line & Load regulation: 0.5% or 1%
- Duty Cycle: Continuous 24x7
- Wave Form Distortion: Nil true to input
- Response Time: Less than 10ms
- Correction Speed: Up to 70V per sec. (Depend on Input Voltage range & capacity)
- Correction Method: Step-Less correction using Auto Variable Transformer
- Suitability: Suitable for all power factor loads
- Cooling: Natural Air Cooled / Forced Air Cooled / Oil Cooled
- Class of Insulation: Available in E / B /F Class
- Break Down Strength & IR: 2500V AC for 2 Minutes. Greater than 50 Mega Ohms at 500V DC
- No Load Loss: Less than 0.4 %
- Efficiency: 97 % to 99% (Depend on Input Voltage range & capacity)
- Ambient Temperature: Wide ambient temperature operation from –20° C to 45° C.
- Winding & Wiring Material: Copper EC grade (99.999% Pure)
- MCCBs & Switchgears: Schneider/L&T/Siemens
- Input / Output Termination: On Brass Studs/Connectors/Copper Bus Bar
- Installation: Indoor & Out door type
- Degree of Protection: IP - 30 to IP - 55
- Overload Cut-Off and Short Circuit Protection
- Low / High Voltage (out of input range) Alarm and / or Cut-Off
- High Temperature Alarm and / or Cut-Off
- Spike and surge protection
- Ammeter, Temperature Meter, Digital Ammeter, Digital Voltmeter
- Stabilizer By Pass System
- Remote control of stabilizer ( with wires )
Single Phase Servo Voltage Stabilizer
IPF Single Phase Servo Voltage Stabilizer
Servo Voltage Stabilizer
Voltage Stabilizer
Stabilizer
Products from Hindustan Power Products Private Limited
Verified
Verified
Verified
Servo Voltage Stabilizer, Air Cooled
Deburring, Drilling, Boring, Tapping and Threading Machines
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines