• Servostar India Private Limited

Servo Voltage Stabilisers

Servostar manufactures a range of Servo Voltage Stabilisers. It is commonly observed that, AC main supply is never 230 V or 415 V, but varies from 150-300 V and 300-500 V. The difficulties caused by them are well known, such as over load condition, line losses, poor power factor and several other reasons. Generally constant voltage which is required to load is never constant, but in fluctuation manner. It is observed that during the daytime, the voltage is quiet low and during the night the voltage is high then the normal. This fluctuation in supply system results frequent breakdown, low production and also loss of energy. The performance of any electrical equipment is optimum at its rated voltage. Both over/under voltages are harmful for the system. The under voltage reduces efficiency whereas the over voltage shortens the life. The power agencies insist the consumer to fix the capacitor to improve power factor to get better results in power saving. But voltage is far more important factor to save the power loss. In case of very low/high voltages, the telecom systems are powered by DG sets. Servostar line conditioner unit meets the requirement of input voltage variation from 110-300 V (single phase) and 300-550 V (three phase). The servo voltage stabiliser is designed and manufactured as per TEC specification. It is a reliable product for stable supply. It's fast correction ratio against quick voltage fluctuation ensures trouble free operation for high precision electrical and sophisticated electronic equipments.