• Cendrop Multilub System Private Limited

Pneumatic Grease Pump

Cendrop Multilub System offers a Pneumatic Grease Pump. This is suitable for dispensing of grease and automatic feeding of grease to bearings and other moving parts of machines, such as milling and rolling machines, presses and hammers, rubber processing machines, dye casting machines, furnaces, etc. This pump is suitable for grease up to NLG-2. For distribution a progressive block is used through this pump. The pump is operated through a pneumatic line, connected to the ports of pneumatic cylinder. The cylinder is built in with the pump housing. Pneumatic pump is available in adjustable discharge and multiport with adjustable discharge in each port. Discharge and reservoir of pump is available as per customer requirement. Air removing: for air removing, unscrew the bleed plug apply compressed air and press the grease pusher by knob till grease come out from bleed port and plug the bleed port. The pump is ready for operation. Construction: there is a reservoir mounted on the pump body for storage of grease. A tell tale rod connected for sensing grease level. Check valve is fitted on the outlet port of the pump to stop reverse flow of grease into the pump through outlet port, to bleed air entrapped in the system, there is a plug on the pump body which is to be opened till continuous flow of grease starts coming, the adjusting screw is provided in order to vary in output of the grease by tightening the screw the output of grease decreases and vice versa, it is must to put filter regulator unit in the pneumatic line fed to the pump. This will ensure that pneumatic line going to the pump is dust and moisture free. Filling: grease filling in the reservoir can be done manually as well as with the help of other pump. For those who wants to fill grease by another pump, a ¼” BSP ports is provide on front side of the pump. This port is normally plugged.