• Cenlub Industries Limited

Centralised Lubrication System, Continuous Type

Cenlub Industries offers a continuous type Centralised Lubrication System. Whenever the lubrication is of continuous in nature, the system is totally different as compared to intermittent system. Basically oil gets ejected on friction areas and returns back to the tank of lubrication unit under gravity. Oil has to be filtered thoroughly when it falls at lubrication points. The system basically requires the following items: suitable reservoir with baffles, continuous duty motors TEFC, positive displacement pump-gear/lobe type, suitable relief valve to relieve excess pressure, suitable inline filter to clean the oil thoroughly, metering valves (progressive feeder) with indicator pin, return line filter with clogging indicator, restrictor ejecting oil at low pressure, instruments like pressure gauge with isolation valve, pressure switch, oil level switch, heater or cooler (optional), and control panel to monitor the pressure, level of oil in the tank, level of filtration as well as houses motor contractor/relay, etc., with auto/manual mode. Continuous lubrication systems are available in standard models: 20, 30, 50, 75 and 120 ltr capacity with 1, 3, 4, 6 and 10 LPM pumps with pressure rating of 5 kg/cm2. Specifications: Models – ALU-20 – ALU-30 – ALU-50 – ALU-75 – ALU-120: reservoir capacity – 20 – 30 – 50 – 75 – 120 ltr; discharge of pump – 1 – 3 – 4 – 6 – 10 LPM; motor – 3-phase, 4 pole, 415 V AC, 0.25 – 0.25 – 0.5 – 0.5 – 1 HP; line pressure – 3 – 3 – 4 – 5 – 7.5 kg/cm²; relief valve –5 – 5 – 7 – 8 – 10 kg/cm2; pressure switch (electrical rating) – 24 V, 0.2 A; float switch (electrical rating) – 24 V, 0.2 A; and cooler – provided as per requirement (optional).