• Hrushikesh Water Science Private Limited

Sand Filter

Sand filtration is very robust method to remove suspended solids from water. The filtration medium consists of a multiple layer of high silica sand with a variety in size and specific gravity. This filter can be supplied in different sizes and materials both hand operated or fully automatically. A special application of this filter is the removal of iron in surface and ground or well water. An iron removal installation consists of an aeration to oxidise and precipitate the iron and manganese, followed by removal of the precipitated particles with this filter. During service water enters from the top, travels through the filtering media and goes out from the bottom. The suspended solids in the water get trapped in the filter and get clean clear water at the outlet. The accumulated dirt (suspended solids) needs to be removed or the filter will get choked & will result in less treatment flow, damage to the filter, damage to the pump, etc. The cleaning operation of the filter is called Backwash. This backwash operation needs to done once the differential pressure across the filter reaches 0.8 kg/cm2 or 24 hours of service cycle.