• Drytech Engineers

Moisture Separators

Drytech Engineers offers Moisture Separators.

Centrifugal Type: DMS-B , DMS-C , DMS-CD

Centrifugal Cum Demister Pad Moisture Separator
Type : Vertical MOC - mild steel / carbon steel

The Models moisture in compressed air enters into separator tangentially and further it travel to pass through baffles which will results in spinning of air around inner separator pipe. The water droplets are impinged on separator wall by this centrifugal action. Thus separates water droplets from air. Here speed of air rescues maximum at the bottom of separator. Then air enters inner pipe resulting in change of direction, further separation of droplets occurs. Then air will pass through demister pad, here moisture will separated in wire mesh and small droplets will be separated and collected at the bottom of separator.

It is designed on impingement principle & basic function is to separate bulk quantity of bigger oil & moisture droplets from compressed air. The separated oil & moisture gets collected in sump & further drained out effectively by providing suitable drain at bottom.

Types:
• Baffle Type
• Centrifugal Type
• Centrifugal cum Demister Pad Type