• Filter Concept Private Limited

Filter With Scrapper Mechanism

Filter Concept Pvt Ltd has introduced a Filter with Scrapper Mechanism. This self-cleaning filter is constructed of filter housing, filter element, back flushing valve, differential pressure gauge, differential pressure switch, scrapper, geared motor with sensor and a control panel. The filter housing can be offered in various materials of construction such as different grades of stainless steel, carbon steel and alloy metal. Filter elements can be offered in wedge wire, multi layered wire mesh, and plain wire mesh configuration, depending upon process requirements. These filters can offer filtration levels starting from 1 micron to 2000 micron. They are designed to deliver flow rate up to 2000 m3/hr or even more than that with parallel configuration. Scapper mechanism: the medium to be cleaned is guided into the filter by inlet, which passes from inside to outside through the cartridge gap. After filtration, the filtered fluid exits the filter housing from the top, opposite to the inlet connection and the bigger solids are separated on the surface of the triangular cartridge wires. When it runs for a certain time, the cartridge gap gets plugged up by impurities and meanwhile the differential pressure reaches its pre-set value. Then PLC inspects the signal and sends out the indication. The gear motor drives the scraper and the particles or agglomerates are skimmed from the surface, thereby keeping the function of cartridge well and keeping the cartridge gap clean. When the impurities at the bottom of the filter increases, the drain valve opens up and the impurities are emptied successfully, which makes the system pressure achieve normality. The company also offers PTFE Cartridge, Spun Bonded Filter Cartridges, Pleated Dust Collection Bag, Bag Vessel Assemblies, Cartridge Filter System, etc.