•    Operating Limit in 50 hz

             Capacity : maximum 78m3/h

             Head : Maximum 440 Mtr.

              Liquid Temperature : 00 C bis +600 C

              Send Content : max. 50g/m3

•     Operating Limit in 60 hz

              Capacity : maximum 118m3/h

               Head : Maximum 460 Mtr.

               Liquid Temperature : 00 C bis +600 C

               Send Content : max. 60g/m3

•     Starting Per hour : Max 15 to 20

•     Normal Outlet Size : 2”, 2.5” , 3” & 4”

•     Immersion : 1 Mtr minimum

•     Pumped liquid : Clean Free from solid chemically natural and close to the characteristics of wate

• Low weight high efficiency

• Suitable to 4” , 6 “ & 8” Submersible Motor.

• All bearings are water- lubricated and have a square shape, enabling sand particles, if any, to leave the pump together with the pumped liquid.

• Bearing bush is made of anti friction rubber to withstand wear resistance.

• Non return Valve made in stainless steel (AISI 304 Grade). The valve casing is designed for optimum hydraulic properties to minimize the pressure loss across the valve and, thus, contributes to the high efficiency of the pump.

• Pump motor coupling is according to NEMA standard.

• Redial flow and mixed flow impellers & bowl made from stainless steel (AISI 304 Grade).

• Stop Ring which is designed as thrust bearings limits axial movements of pump shaft.

• Suction Case , stage casing and discharge chambers are made by stainless steel (AISI 304 Grade)from sheet metal so rust free and long service life

• The inlet strainer prevents particles over a certain size from entering the pump.