• Mec Shot Blasting Equipments Private Limited

Abrasive Blasting Cabinet - Wet Blaster

Mec Shot-Blasting Equipments manufactures wet blaster, an abrasive blasting cabinet that works on induction-suction principle of blasting. The most important point in wet blasting is its ability to use very fine abrasive - as fine as 5 micron. Fine abrasive particles are suspended in liquid, usually water and then pumped to a nozzle as slurry. At nozzle, the slurry is introduced into air-stream and propelled against job. The wetted parts of pump are of thermo set plastic material for corrosion resistance. This machine is useful in tool room to remove feather burrs from multi-tooth cutting tools, such as, milling cutters, holes, broaches and taps eliminating hours of hand honing time. It deburrs intersecting holes in precision parts, which are inaccessible by any other method. The fine machined surface can be super-finished without damage to sharp edges and exact tolerances. The following options are available on request: higher capacity slurry pump for high output, higher output blast gun in place of standard, foot operated treadle switch for blasting On/Off, and fitted with optional accessories.