• Thermo Engineering Works

Thermic Fluid Heater, Solid Fired

Thermo Engineering Works offers Solid FiredThermic Fluid Heater.

The "THERMO – TEW3V - is forced circulated thermic fluid heater. The Thermic fluid is pumped and circulated in a closed circuit and the heat is generated for the process. The same Thermic fluid is used over and over again.

HEAT EXCHANGER
An integrated combustion chamber is arranged as a nest of concentric coils are placed within 3 sturdy shell of mild steel. The concentric helical tube coils allow 3 flue passes, so as to ensure optimum rate of heat release and maximum heat transfer. The design avoid extensive use of refractory material with all standard accessories, is mounted on a sturdy steel skid for easy installation.

EXTERNAL FURNACE
Coal/Lignite/Wood/Husk or agro waste is burnt in an external furnace. This avoids any possible damage to the thermic fluid heater coil. Emergency chimney is provided as safe-guard against power failure.

FURNACE DESIGN
The whole furnace is enclosed in steel casting. The combustion chamber is constructed with best quality high duty heat firebricks and insulation bricks. Air insulation is provided to minimize the heat losses.

DESIGNED FOR LOWER GRADE COAL
The volume of the furnace and gate area are specially designed for firing with low grade coal having lower calorific value.

HIGH COMBUSTION EFFICIENCY
The design incorporates the balance draft system, with forced draft fan for primary and secondary air and induced draft fan. This ensures high thermal efficiency and complete combustion of volatile.

HIGH THERMIC EFFICIENCY
The Thermo pack' incorporates 3 pass design and constantly gives an efficiency of around 70%