• NMTG Mechtrans Techniques Private Limited

Stud Type Bearings

The cam follower is a compact bearing with a high-rigidity shaft and a built-in needle bearing. This is most suitable as a guide roller for cam mechanisms and linear motion of automated machines and dedicated machines. Stud type cam followers come with standard as well as eccentric stud cage/needles guided cylindrical/crowned outer race, grease filled and ready to use. Holes for grease nipple and plug fitting are provided. These can be used as full complement bearings and can take heavier loads but at lower speeds. Model NCF is a low-price cam follower having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere and generates little dust. Model NCFT is basically the same as the popular type cam follower, provided with tapped holes for piping on the stud head and the thread. It is optimal for locations where an integrated piping system for greasing is required. Model NCFe can be installed in the same mounting hole as that of the popular type cam follower. Since the mounting shaft of the stud and the stud head are eccentric by 0.25 mm to 1.0 mm, the position of this model can easily be adjusted simply by turning the stud. Thus, it is a compact, highly accurate eccentric cam follower with an integral structure.