Schedule a Call Back
Pushcorp Afd62 End Effector (Eoat)
Pushcorp Afd62 End Effector (Eoat)
SWIT offers a wide range of pushcorp AFD62 end effector (EOAT).
- The AFD62 is part of PushCorp’s Passive Compliance series. This end effector can apply up to 27 lbf [120 N] in any orientation. Unlike the active series, this equipment relies on an external air pressure regulator to set the applied force.
- This pressure must change when a new orientation is programmed in order to maintain a constant force. For this reason, the AFD62 is most commonly used for robotic, material-removal applications with flat or prismatic parts.
- High speed spindles can be mounted to the AFD62. Together, they can automate a wide variety of light-duty, robotic processes: automated grinding; automated sanding; automated polishing; automated deburring; automated deflashing.
- If the application requires a heavier spindle, our AFD72 is the third largest in the series. It can apply up to 60 lbf [267 N] and features a more robust set of linear bearings.
- The AFD62 Series is available in two configurations: AFD62-1 Vertical and the AFD62-2 Horizontal. The units are functionally identical but differ in the orientation in which they attach to the robot's wrist. This allows you to optimize a robot’s reach and dexterity for your particular application.
- Its features include: Single or Double acting force application; Carriage Position sensor included; Low cost; Smaller size; User supplied pressure regulator;
- All fittings, fasteners, and threaded holes are Metric.
Products from SWIT (PFERD)
Verified
Ceramic Reinforced Grinding Wheels
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines